Paragliders in commercial use (training and tandem flights) should be undergoing Full Inspection every 12 months (excluding first 24-month period after purchase). Technical inspection is carried out by the manufacturer or authorised person. TECHNICAL DATA High Performance EN-C Elan 2 Elan 2 Elan 2 Elan 2 Elan 2...
MANUAL FOR PARAGLIDER CHECKS Check-intervals All paragliders used in flight must be checked at least every 24 months. For paragliders used by paragliding schools the period is 12 months. Personnel authorised to carry out checks Training course by manufacturer is the basis for permission to carry out paraglider checks.
Page 4
Full line length measurement Lines should be separated and each line measured under a tension of 5 kg. Measurement is made from the line karabiner to the canopy`s surface in according to the method of certification. Measurement of brake lines is made from the knot on swivel to upper loop of galery line.
LENGTH OF LINE – ELAN 2 - 22 Mentioned line lengths are marked on stretched lines that are pulled under 5 kg. The real length measured from one loop to other loop differs in according to type of the line, its diameter and type of processing method (sewing or splicing). When replacing a line always compare the symmetry with opposite side.
Page 8
LENGTH OF LINE – ELAN 2 - 24 Mentioned line lengths are marked on stretched lines that are pulled under 5 kg. The real length measured from one loop to other loop differs in according to type of the line, its diameter and type of processing method (sewing or splicing). When replacing a line always compare the symmetry with opposite side.
Page 9
LENGTH OF LINE – ELAN 2 - 26 Mentioned line lengths are marked on stretched lines that are pulled under 5 kg. The real length measured from one loop to other loop differs in according to type of the line, its diameter and type of processing method (sewing or splicing). When replacing a line always compare the symmetry with opposite side.
Page 10
LENGTH OF LINE – ELAN 2 - 28 Mentioned line lengths are marked on stretched lines that are pulled under 5 kg. The real length measured from one loop to other loop differs in according to type of the line, its diameter and type of processing method (sewing or splicing). When replacing a line always compare the symmetry with opposite side.
Page 11
LENGTH OF LINE – ELAN 2 - 30 Mentioned line lengths are marked on stretched lines that are pulled under 5 kg. The real length measured from one loop to other loop differs in according to type of the line, its diameter and type of processing method (sewing or splicing). When replacing a line always compare the symmetry with opposite side.
Page 12
LENGTH OF LINE – ELAN 2 - 33 Mentioned line lengths are marked on stretched lines that are pulled under 5 kg. The real length measured from one loop to other loop differs in according to type of the line, its diameter and type of processing method (sewing or splicing). When replacing a line always compare the symmetry with opposite side.
FULL LINE LENGTHS Elan 2 - 22 (XS) Elan 2 - 24 (S) Elan 2 - 26 (M) Center Brakes Center Brakes Center Brakes 6892 6816 6925 7215 7107 7029 7141 7490 7394 7312 7430 7785 6850 6774 6877 6930...
Page 14
MEASURING FULL LINE LENGTHS Main lines Brakes line Standard system Raff system...
Page 15
Loop on C strap Swivel Brake Accelerator Press buttons Loop for main karabineer Trimm postition Accelerated Slower Faster Riser lengths Elan 2 Trim-position Accelerated The lengths are measured from the main attachment point to the lower edge of rapid links. Riser...
Page 16
Main brake line - Dynema/Polyester A-7850-200, Breaking Load 200 kg (ROSENBERGER TAUWERK, GERMANY) Main lines A1,A2,A3,B1,B2,B3,C1,C2,C3 - Dynema/Polyester PPSL 191,Breaking Load 191 kg (For Elan 2-30 and 33) Main lines A2,A3,B2,B3 - Dynema /Polyester PPSL 200, Breaking Load 200 kg Attachment straps (STUHA a.s., DOBRUSKA, Opočenská...