Table of Contents
Advertisement
"00:00" and
Press a button to stop the signal.
If you set the MINUTE MINDER
when the DURATION or END
function operates, the symbol
comes on in the display.
6.3 Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates. It is on immedi-
ately when the oven starts to heat.
7. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
7.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• The oven temperature. Refer to the ta-
ble for roasting.
• The core temperature. Refer to the ta-
ble for the core temperature sensor.
Only use the core temperature
sensor supplied with the appli-
ance, or genuine replacement
parts.
1.
Set the oven function and the oven
temperature.
2.
Put the point of the core tempera-
ture sensor (with the symbol
the handle) into the centre of the
meat.
flash in the display.
on
To reset the Count Up Timer, press and
hold
and
.
You cannot use the Count Up
Timer when Duration or End
function operates.
3.
Put the plug of the core temperature
sensor into the socket on the front of
the appliance. The display shows the
symbol of the core temperature sen-
sor and the default core tempera-
ture. When you use the core temper-
ature sensor for the first time, the
default core temperature is 60 °C.
4.
While
flashes, you can use the
knob for the temperature to change
the default core temperature.
5.
Press
to save the new core tem-
perature, or wait 10 seconds for the
setting to be saved automatically.
The new default core temperature is
displayed during the next use of the
core temperature sensor.
6.
Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
ENGLISH
11
Advertisement
Table of Contents
