Clock Functions - AEG BE5304001 User Manual

Hide thumbs Also See for BE5304001:
Table of Contents

Advertisement

10 www.aeg.com
5.6 Heat-up / Residual heat
indicator
If you activate an oven function, the bars
in the display

6. CLOCK FUNCTIONS

SYM-
BOL
Press
change the clock function.
Press
of the clock functions, or wait 5
seconds for the setting to be
confirmed automatically.
6.1 Setting the DURATION or
END
1.
Press
display shows
2.
Press
3.
Press
4.
Press
5.
Press
nal sounds for 2 minutes after the
time ends.
time setting flash in the display. The
oven stops.
6.
Press any button or open the oven
door to stop the acoustic signal.
come on one by one.
FUNCTION
MINUTE MIND-
ER
TIME OF DAY
DURATION
END
again and again to
to confirm the settings
again and again until the
or
or
flashes in the display.
or
to the set minutes.
to confirm.
or
to set the hour.
to confirm. An acoustic sig-
or
symbol and
The bars show that the oven tempera-
ture increases or decreases.
To set a countdown time. This function has no ef-
fect on the operation of the oven. You can set the
MINUTE MINDER at any time, also when the ap-
pliance is off.
To set, change or check the time of day. Refer to
"Setting the time".
To set how long the appliance must operate. First
set an oven function before you set this function.
To set when the appliance must be deactivated.
First set an oven function before you set this func-
tion. You can use Duration and End at the same
time (Time Delay) to set the time when the appli-
ance must be activated and then deactivated.
6.2 Setting the MINUTE
MINDER
1.
2.
.
3.
4.
DESCRIPTION
If you press
when you set the
hours for DURATION
appliance goes to setting of the
END
function.
Press
.
and "00" flash in the display.
Press
or
to set the MINUTE
MINDER. At first, the time is calcula-
ted in minutes and seconds. When
the time you set is longer than 60
minutes, the symbol
the display. The appliance now cal-
culates the time in hours and mi-
nutes.
The MINUTE MINDER starts auto-
matically after five seconds.
After 90% of the set time, an
acoustic signal sounds. Press a
button to stop the signal.
When the set time ends, an acoustic
signal sounds for two minutes.
, the
comes on in

Advertisement

Table of Contents
loading

Table of Contents