Changing Administrator Password; Saving Settings To Non-Volatile Memory - D-Link DSL-2520U Quick Installation Manual

Adsl2/2+ router with usb and ethernet ports

Hide thumbs Also See for DSL-2520U:

Table of Contents

DSL-2520U

Changing Administrator Password

It is highly recommended to change the administrator password upon initial

configuration. This helps you to improve your network security.

1. Go to the System / Administrator password page.

2. Enter a new password for the administrator account in the Password

and Confirmation fields.

3. Click the Save button.

Remember or write down the new password for the administrator

account. In case of losing the new password, you can access the settings

of the router only after restoring the factory default settings via the

hardware RESET button. This procedure wipes out all settings that you

have configured for your router.

In order to avoid losing the new settings upon hardware reboot (accidental or

intentional power-off of the device), it is recommended to save the settings to

the non-volatile memory of the router.

Click the Save&Reboot line in the top-page menu displayed when the mouse

pointer is over the System caption.

Wait until the router is rebooted. Now you can use it to access the Internet or

access the web-based interface of the router to configure additional

parameters. For detailed description of every page of the web-based interface,

see

the

"User

2520U/Description/).

Manual"

document

Quick Installation Guide

(ftp.dlink.ru/pub/ADSL/DSL-

Table of Contents