JUKI LZ-2290A-SR-7 Manual page 5

Computer-controlled, direct-drive, high-speed, 1-needle, lockstitch, zigzag stitching machine with automatic thread trimmer

Hide thumbs Also See for LZ-2290A-SR-7:

Max zigzag width

/ Max feed pitch

Two different part numbers are assigned to one presser foot ( ex. 22547962 and 22547970), if you place a order for 22547962 ( left number ),

factory supplies you presser foot installed with a big figure guide, 22547970 ( right number ) with small finger guide respectively.

Throat plate

Feed dog

Max. feed amount: 2.5mm

Max. feed amount: 1.6mm

Max. feed amount: 1.3mm

Max. feed amount: 2.5mm

Max. feed amount: 5mm

Max. feed amount: 2.5mm

Max. feed amount: 5mm

Max. feed amount: 2.5mm

Max. feed amount: 5mm

Max. feed amount: 2.5mm

Presser foot (with finger guard)

Light-in-weight type

with the front fulcrum

Light-in-weight type

Presser foot with a knife

Using one trimming knife.

Threed cutter knife

Light-in-weight type

with the front fulcrum

Light-in-weight type