Palsonic 6825G Owner's Manual page 17

1,3
DSP
Fine tuning
Please enter the SEARCH menu first
Fine tuning is not necessary under normal
conditions. However, in area of inferior
broadcast conditions where adjustment is
necessary for better picture and sound, use
Fine tuning.
1 Press CH+ or CH- button to select POSITION item.
Press VOL+ or VOL- buttons to select a channel number
2
you want to fine-tune (for example, channel 99).
Press CH+ or CH- button to select MFT item.
3
4 Press and hold VOL+ or VOL- button till the best
possible picture and sound are obtained.
2,4
Calling the on-screen display
You can call the on-screen display by pressing the DSP button on the
remote controlle. The first press of the DSP button display the current
state (if in TV mode, the current channel number will display) and the next
press display the clock time. Press this button again to cancel the OSD.
15