Palsonic 6825G Owner's Manual page 16

Tuning in
1,3
1,3
(continued)
Manual Search
Please enter the SEARCH menu first
Use MANUAL SEARCH function if desired
channels cannot be preset or if you would like to
preset channels to specific position numbers one
by one
1
Press CH+ or CH- button to select POSITION item.
Press VOL+ or VOL- buttons to select a channel
2
number (ranging from 000~255).
Press CH+ or CH- button to select SEARCH item.
3
Press VOL+ or VOL- button to start program search
4
manually.
Pressing VOL+, the set searches towards higher frequency;
Pressing VOL-, the set searches towaords lower frequency;
The search stops when a program is located and this program will be
2,4
stored in the specified position number.
2,4
!
Notes:
1. You can use BAND selection to quicken search process if you know
which band your desired progam locates in. The band switches
amoung VHFL, VHFH and UHF.
2.
Repeat the above steps if you want to store another program in other
position numbers
To skip an unnecessary channel
Press CH+ or CH- button to select POSITION item.
1
Press VOL+ or VOL- button to select a channel
2
number, for example, channel 009.
Press CH+ or CH- button to select SKIP item.
3
Press VOL+ or VOL- button to
4
select ON.
Now channel 9 will be skipped when
you browse by CH+ or CH- button.
To restore a skipped channel, please select channel by step
1, 2 then repeat step 3 and 4 and set SKIP item to OFF.
14