Turning On/Off - Palsonic 6825G Owner's Manual

Turning on
1 Press the Power Switch on the
TV set.
The TV set is in STANDBY and the
Yellow indicator lights up.
2, 2
2
In STANDBY mode, press the
on the remote controller and the TV set is turned on.
3 In STANDBY mode, you can also press the
VOL
on.
!
Notes:
If there is no input signal, then a
blueback appears. After 15 minutes,
the set auto goes to STANDBY.
Turning off
1
Press the Power Switch on the TV set if you want to
cut off the power completely.
If you want to turn off the TV set temporarily,
2
press the

Turning on/off

, CH or TV/AV button on the set to turn
button on the remote controller.
11
button or 0-9 buttons