Candy DT-01220 Instruction Manual page 81

If the timer is set on more than one zone:
1. When you set the time for several cooking zones
simultaneously, decimal dots of the relevant
cooking zones are on. The minute display shows
the min. timer. The dot of the corresponding
zone flashes.
:
2. Once the countdown timer expires, the
corresponding zone will switch off. Then
it will show the new min. timer and the dot
of corresponding zone will flash.
. .
Using the Keep Warm function
Actived the Keep warm function
1. Touching the heating zone selection control
2. Touching the keep warm control
indicator show " "
Cancel the keep warm function
Touch "-" or "+" control of the corresponding zone,
then the cooking zone will revert to the level you select.
(set to 15 minutes)
(set to 45 minutes)
,the zone
PT-9
Safety mode
To ensure the safety of children, the induction hob is fitted with
an interlock device.
Lock:
In working mode, press the "
into the lock mode, timer will display "
rest of the keys are disabled except the "
In standby mode, press the "lock" key, the hob then goes
into the lock mode, the timer shows"
of the keys are disabled.The timer shows"
while and then goes out.
If you press the key, "
while.
Unlock:
Hold down the"Lock" key for 3 second, and the lock
function will be deactivate.
WIFI FUNCTION
First of all,you should download S S imply-Fy and install to your
portable device. Then enroll your induction hob.
Refer to annex for details.
To use the WIFI function, switch the hob on and press
the WIFI key.The wifi LED flash fast for 5 seconds
which means the WIFI module is booting.If the WIFI
module connects the router,the wifi LED will remain on all
the time.Otherwise,the WIFI LED will be flashing in
cycles of 1 second on 1second off.
If connect correctly,you can find many hob information
from S S imply-Fy,e.g.Zone power,remaining heat time.
" key, the hob then goes
" and the
" key.
" and the rest
" for a
" will be displayed for a