Problem Solving - Epson EB-G7905U User Manual

Problem Solving

If any of the following problems occur and the indicators do not offer a
solution, refer to the pages given for each problem.
Problems relating to images
• No images appear
Projection does not start, the projection area is completely black,
or the projection area is completely blue.
• Moving images are not displayed
Videos played back on a computer are black or no image is
projected, or the video is not played back on the computer.
• Projection stops automatically
• The message "Not supported" is displayed
• The message "No Signal" is displayed
• Images are fuzzy, out of focus, or distorted
• Interference or distortion appear in images
• The image is truncated (large) or small, the aspect ratio is not
suitable, or the image has been reversed
Only part of the image is displayed, the height and width ratios
of the image are not correct, or the image may appear reversed
from top to bottom or left to right.
• Image colors are not right
The whole image appears purplish or greenish, images are black
& white, or colors appear dull.
• Images appear dark
Problems when projection starts
• The projector does not turn on
Other problems
• No sound can be heard or the sound is faint
• The remote control does not work
• Nothing appears on the external monitor
• I want to change the language for messages and menus
• Email is not received even if a problem occurs in the projector
• "The battery that saves your clock settings is running low." is
sp.180
displayed
sp.180
sp.181
sp.181
sp.181
sp.182
sp.182
sp.183
sp.184
sp.184
sp.185
sp.186
sp.186
179
sp.187
sp.188
sp.188
sp.188