Adjust The Edges Of The Images (Edge Blending) - Epson EB-G7905U User Manual

Multi-Projection Function
(2) Adjust the brightness difference for each projector lamp.
s "Correcting the Brightness (EB-G7905U/EB-G7900U/EB-G7500U/EB-
G7200W/EB-G7000W/EB-G7805/EB-G7800/EB-G7100 only)"
(3) Adjust the color balance of the projected images.
s "Fine-tuning the color balance"

Adjust the Edges of the Images (Edge Blending)

You can fine tune the overlapping areas to make seamless screen.
a
Press the [Menu] button while projecting.
"Using the Configuration Menu"
s
b
Select Multi-Projection from Extended.
p.105
p.106
p.134
c
Select Edge Blending, and then press the [
The following screen is displayed.
Submenu
Edge Blending Set to On to activate Edge Blending. Set to Off
when not projecting from multiple projectors.
Blending: Set to On to activate Edge Blending
Top Edge/Bottom
towards your settings, and the blend range will be
Edge/Left Edge/Right
shaded.
Edge
Blend Start Position: Displays blending start
position as a red line, and adjusts at the level of one
pixel.
Blend Range: Adjusts the range to be shaded.
Adjustment is possible at the level of one pixel. The
maximum range is 45% of the resolution.
Blend Curve You can select from three ways of shading.
Set to On to display a guide on the Edge Blending
Guide Display
setting range.
103
] button.
Function