Table of Contents
Advertisement
4-2
Storage
Stored Position
1. Pull the handle (3) toward the
rear of the boot while pulling up
to release the boot partition (2)
from the brackets (1).
2. Hold the handle (3) and slowly
let the boot partition (2) roll up
toward the front of the boot (4).
3. Attach the handle (1) to the
rolled-up boot partition (2) at the
front of the boot (3).
See Convertible Top Messages on
page 5-29.
Centre Console Storage
To open, lift the latch on the front
edge of the armrest.
There is an accessory power outlet,
a USB port, and an audio jack in the
storage area. See Power Outlets on
page 5-5. See "USB" in the
infotainment manual.
Additional Storage
Features
Tonneau Cover
Installation
1. Remove the tonneau cover
storage bag from the boot and
remove the tonneau cover.
2. Unfold and place the tonneau
cover on the vehicle.
Advertisement
Chapters
Table of Contents
