Table of Contents
Advertisement
The bright metal mouldings on the
vehicle are aluminium. To prevent
damage always follow these
cleaning instructions:
Be sure the moulding is cool to
the touch before applying any
cleaning solution.
Use a cleaning solution
approved for aluminium. Some
cleaners are highly acidic or
contain alkaline substances and
can damage the mouldings.
Always dilute a concentrated
cleaner according to the
manufacturer's instructions.
Do not use chrome cleaners.
Do not use cleaners that are not
intended for automotive use.
Use a nonabrasive wax on the
vehicle after washing to protect
and extend the moulding finish.
Convertible Top Care
Frequently hand wash convertible
tops with mild car wash soap. Never
use a stiff brush, steam, bleach,
or aggressive cleaners.
If necessary, a soft brush can be
used to remove dirt. When finished
cleaning, thoroughly rinse the fabric.
Avoid automatic car washes with
overhead brushes or very high
pressure sprays as they can cause
damage and leaking.
Only lower the top when it is
completely dry and avoid leaving
the top lowered for extended
periods of time to prevent excessive
interior weathering.
Avoid leaving large amounts of
snow on the top for extended
periods of time as damage may also
occur.
Vehicle Care
Bonnet Air Extractor
It is not recommended that the air
extractor on the SS and ,
if equipped V6, be waxed, as it will
change the gloss level of the
surface. In addition, care must be
used when waxing around the air
extractor. If a small amount of wax
is applied to the extractor it can
create an irregular appearance in
the surface of the panel. If wax,
debris, or other materials create
stains on the air extractor, see your
dealer for the recommended
cleaner.
10-77
Advertisement
Chapters
Table of Contents
