Chevrolet CAMARO 2015 Owner's Manual page 255

10-62 Vehicle Care
within 161 km (100 mi) of
driving to have the tyre
repaired or replaced.
Using the Tyre Sealant and
Compressor Kit without
Sealant to Inflate a Tyre (Not
Punctured)
The kit includes:
1. Sealant Canister Inlet Valve
2. Sealant/Air Hose
3. Base of Sealant Canister
4. Tyre Sealant Canister
5. On/Off Button
6. Slot on Top of Compressor
7. Pressure Deflation Button
8. Pressure Gauge
9. Power Plug
10. Air Only Hose
If a tyre goes flat, avoid further tyre
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers. See Hazard
Warning Flashers on page 6-4.
See If a Tyre Goes Flat on
page 10-55 for other important
safety warnings.
1. Remove the compressor from its
storage location. See Storing the
Tyre Sealant and Compressor
Kit on page 10-64.
2. Remove the air only hose (10)
and the power plug (9) from the
bottom of the compressor.
3. Place the compressor on the
ground near the flat tyre.
Make sure the tyre valve stem is
positioned close to the ground
so the hose will reach it.
4. Remove the valve stem cap from
the flat tyre by turning it
anticlockwise.
5. Attach the air only hose (10) to
the tyre valve stem by turning it
clockwise until tight.