10-66
Vehicle Care
Hex-Head Jack with Three-Piece
Wrench
1. Tool Container
2. Three-Piece Wrench
3. Strap
4. Hex Head Jack
1. Tool Container
2. Jack
3. End of the Jack
1. Turn the end of the jack (3)
anticlockwise to loosen it.
Remove the jack (2) from the
retaining bracket.
2. Remove the tool container (1).
3. Remove the tools and tire strap
from the tool container.
4. Place the tools next to the tire
being changed.
Removing the Flat Tyre and
Installing the Spare Tyre
1. Do a safety check before
proceeding. See If a Tyre Goes
Flat on page 10-55 for more
information.
2. If the vehicle has wheel bolt
caps, remove the caps. Store
the caps with the wheel cover.
3. Use the fully extended wheel
wrench to loosen all the wheel
nuts one-half turn
counterclockwise. Do not
remove them yet.