Table of Contents
Advertisement
SB50HB Series Woodburning Fireplace
1. Read these instructions entirely before beginning any
part of the installation. Save these instructions for any
future repairs.
2. Use these instructions as a guide during the installation
of the fireplace.
3. Be sure these instructions become the property of
and are reviewed by all future users of this fireplace to
encourage proper operation and maintenance.
4. All the parts used with this fireplace system must
be installed in accordance with these installation
instructions. Failure to do so may be hazardous and
will void the warranty.
5. This fireplace and accessories should not be altered
in any way that is not specifically recommended in this
manual.
6. Refer to your local building code for local requirements
pertaining to installation of factory-built fireplaces.
Fireplaces are intended for installation and use
according to standard NFPA No.211 of the National Fire
Protection Association.
7. This fireplace must not be installed with a masonry
flue.
8. This fireplace and chimney should not be used for
venting a wood or coal burning heater or fireplace
insert.
Intended product usage
The fireplace is designed to sit directly on a
combustible floor. The fireplace must be installed with
clearances to combustible building materials specified
in this manual. Only parts manufactured by MHSC
and labeled for use with the fireplace should be used
in the installation of this fireplace except for special
roof flashings that may be fabricated locally. The use
of improper parts in the installation can be hazardous
and voids the warranty offered by MHSC.
This fireplace is designed to burn wood. This fireplace
is not designed to burn coal, unplumbed liquid fuels,
unplumbed gaseous fuels or household refuse. Any
attempt to burn these fuels in the fireplace can be
hazardous.
4
IMpOrTaNT INFOrMaTION
Failure to heed usage warnings may cause a fire
hazard and will void the Warranty. This fireplace is
intended for supplemental heating only and is not
intended for use as a primary heating system. For
use with Solid Wood Fuel, UL Classified Processed
Solid Fuel Fire Logs, or Certified Decorative Gas
Appliance.
do not use a fireplace insert or other product not
specified for use with this fireplace.
Improper Installation
Improper installation or use of this fireplace will void
the warranty and can cause:
1. Damage to the fireplace from overheating.
2. Hazardous temperatures to develop on
combustible materials adjacent to the fireplace
or chimney.
3. The emission of smoke, sparks or hazardous
gases into the dwelling.
4. Leakage of rain water into the dwelling.
87D0058
Advertisement
Table of Contents
