Synchronization (Hotsync) - palmOne TREOTM TreoTM 650 Using Manual

Palmone smartphone instruction manual treotm 650
Table of Contents

Advertisement

Every device needs a
unique name. Never
synchronize more than one
device to the same
username on your
computer.

176 :: Synchronization (HotSync)

Synchronization (HotSync)
Synchronization lets you back up your Treo information onto your computer. If you ever
need to perform a hard reset or otherwise erase all your information on your Treo, you
can synchronize your phone with your computer to restore the info. To make sure you
always have an up-to-date backup of your info; synchronize frequently.
Before you attempt to synchronize, make sure you've installed the desktop
synchronization software from the palmOne Software Installation CD.
Palm Desktop does not respond to HotSync attempt
As you complete the following steps, synchronize after each step. If the
synchronization is successful, you do not need to complete the remaining steps.
1. Verify that the USB sync cable is securely connected at all points (see "Setting up
your computer" on page 30).
2. Make sure that HotSync Manager is running:
• Windows: Click the HotSync Manager icon
make sure Local USB is checked. If you don't see the HotSync Manager icon,
click Start, select Programs, select palmOne, and then select HotSync Manager.
• Mac: Find the Palm folder on your Mac hard drive. Double-click the HotSync
Manager icon
Local Setup Port to palmOne USB.
in the Palm folder. In the Connection Settings panel, set the
in the lower-right corner and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Treo 650

Table of Contents