Phone Lock - palmOne Treo 600 Using Manual

Phone Lock

You can lock your phone to prevent unauthorized use of your mobile account. When
your phone is locked, you must enter the correct Lock Code to make calls. You can,
however, still place emergency calls when you phone is locked, and you can also
receive calls.
1. Press Phone .
2. Press Menu .
3. From the Options menu, choose Phone Lock (/L).
4. Choose one of the following Lock Wireless Mode options:
• On Wireless Mode power off: Locks your phone each time you turn off
Wireless Mode. When this setting is active, you must enter your lock code each
time you turn Wireless Mode on again.
• Immediately: Locks your phone when you choose OK. The next time you turn
Wireless Mode on you must enter your lock code. After that, you can turn
Wireless Mode on again without entering your lock code.
5. When prompted, enter the current Lock Code and choose OK. Unless you changed
your Lock Code, enter the default Lock code, which is the last four digits of your
phone number.
6. If you want to change the Lock Code, choose Change Lock Code, enter a new
Lock Code, then choose OK to accept it. Repeat this step to verify the new Lock
Code.
7. Choose Advanced to specify three emergency numbers that you can dial even
when your phone is locked.
Important: If you lock your
system, you must enter the
exact password to unlock
it. If you forget the
password, you need to
perform a hard reset to use
your phone. Performing a
hard reset deletes all the
records in your phone (see
page 142). However, you
can restore all previously
synchronized data at the
next HotSync operation
(see page 31).
To lock your system
manually, choose Lock &
Turn Off, and then choose
Off & Lock.
Locking your phone and data :: 131