Handling And Maintenance Of The Screen; Specifications; On Dew Condensation; Disposal Of The Unit - Sony LMD-A240 Operating Instructions Manual

Handling and Maintenance of the
Screen
The surface of the screen is specially coated to reduce
image reflection. Make sure to observe the following
points as improper maintenance procedures may impair
the screen's performance. In addition, the screen is
vulnerable to damage. Do not scratch or knock against it
using a hard object.
 Be sure to disconnect the AC power cord from the AC
outlet before performing maintenance.
The surface of the screen is specially coated. Do not

attach adhesive objects, such as stickers, on it.
 The surface of the screen is specially coated. Do not
touch the screen directly.
 Wipe the screen surface gently with the supplied
cleaning cloth or a soft dry cloth to remove dirt.
Stubborn stains may be removed with the supplied

cleaning cloth, or a soft cloth slightly dampened with a
mild detergent solution.
 The screen may become scratched if the cleaning cloth
is dusty.
 Never use strong solvents such as alcohol, benzene,
thinner, acidic or alkaline detergent, detergent with
abrasives, or chemical wipe as these may damage the
screen.
 Use a blower to remove dust from the screen surface.

On Dew Condensation

If the unit is suddenly taken from a cold to a warm
location, or if ambient temperature suddenly rises,
moisture may form on the outer surface of the unit and/
or inside of the unit. This is known as condensation. If
condensation occurs, turn off the unit and wait until the
condensation clears before operating the unit. Operating
the unit while condensation is present may damage the
unit.
On Repacking
Do not throw away the carton and packing materials.
They make an ideal container which to transport the
unit.

Disposal of the Unit

Do not dispose of the unit with general waste.

Do not include the monitor with household waste.
 When you dispose of the monitor, you must obey the
law in the relative area or country.

Specifications

Picture performance
Panel a-Si TFT Active Matrix LCD
Picture size (diagonal)
LMD-A240: 611.3 mm (24
LMD-A220: 546.1 mm (21
LMD-A170: 419.6 mm (16
Effective picture size (H × V)
LMD-A240: 518.4 × 324.0 mm
1
(20 / × 12
2
LMD-A220: 476.1 × 267.8 mm
3
(18 / × 10
4
LMD-A170: 365.8 × 205.7 mm
1
(14 / × 8
2
Resolution (H × V)
LMD-A240: 1920 × 1200 pixels
(WUXGA)
LMD-A220/A170: 1920 × 1080 pixels
(Full HD)
Aspect LMD-A240: 16:10
LMD-A220/A170: 16:9
Pixel efficiency 99.99%
Viewing angle (Panel specification)
89°/89°/89°/89° (typical)
(up/down/left/right, contrast > 10:1)
Normal scan 0% scan
Color temperature
D65, D93
Warm-up time Approx. 30 minutes
To provide stable picture quality, turn
on the power of the monitor and
leave it in this state for more than 30
minutes.
Input
SDI input connector
BNC type (2)
HDMI input connector
HDMI (1)
HDCP correspondence
Composite input (NTSC/PAL) connector
BNC type (1)
1 Vp-p ± 3 dB sync negative
Audio input connector
Stereo mini jack (1)
–5 dBu 47 kΩ or higher
Remote input connector
Parallel remote
RJ-45 modular connector 8-pin (1)
Serial remote
RJ-45 modular connector (1)
(ETHERNET, 10BASE-T/100BASE-
TX)
DC input connector
1
/ inches)
8
1
/ inches)
2
5
/ inches)
8
7
/ inches)
8
5
/ inches)
8
1
/ inches)
8
21
Specifications