Using The Memory Function; Averaging Function - Omron HEM-670ITCAN Instruction Manual

USING THE MEMORY FUNCTION

When the AUTO MEMORY is set to ON, the monitor stores up to 84 sets
of measurement values with the date and time. When 84 sets of
measurement values are stored, the oldest record is deleted to save the
most recent values.
If the AUTO MEMORY is set to OFF, measurement values are not stored
in the memory.

AVERAGING FUNCTION

The monitor calculates the average reading based on the three most recent
sets of measurement values taken within 10 minutes of the most recent
reading.
NOTE: If two sets of measurement values are stored in the memory for
the 10 minutes period, the average is based on the two sets of
measurement values. If one set of measurement values is stored,
this is displayed as the average.
42