Specifications - Ultimaker 2 User Manual

Printing
Print technology
Build volume
Layer resolution
Positioning precision
Filament diameter
Nozzle diameter
Print speed
Travel speed
Software
Supplied software
File types
Supported OS
Electrical
AC Input
Connectivity
Physical dimensions
Desktop space
Shipping dimensions
Weight
Shipping weight
Temperature
Ambient operation temperature
Storage temperature
Nozzle operation temperature
Heated bed operation temperature
Sound
Average operational noise
CAUTION: The Ultimaker 2 generates high temperatures and has hot moving parts that can cause injury. Never
reach inside of the Ultimaker 2 while it is in operation. Always control the Ultimaker 2 with the button at the front or
with the power switch at the back. Allow the Ultimaker 2 to cool down for 5 minutes before reaching inside.
CAUTION: When opening the Ultimaker 2 for service, ensure that the power supply is turned off and the power
cable is disconnected from the wall socket.
CAUTION: Only use the power supply that came with your Ultimaker 2.
Fused Filament Fabrication
223 mm / 223 mm / 205 mm
Fast: 200 micron (0.2 mm)
Normal: 100 micron (0.1 mm)
High: 60 micron (0.06 mm)
Ulti: 40 micron (0.04 mm)
12.5 micron / 12.5 micron / 5 micron
2.85 mm
0.4 mm
30 mm/s - 300 mm/s
30 mm/s - 350 mm/s
Cura - Official Ultimaker Software
STL / OBJ / DAE / AMF
Windows / Mac / Linux
100 - 240 V
Approx. 1.4 AMPS
50 - 60 Hz
221 Watt max.
Stand-alone SD card printing
357 mm / 342 mm / 388 mm
400 mm / 400 mm / 550 mm
11.2 kg
18.0 kg
15 - 32 °C
0 - 32 °C
180 - 260 °C
50 - 100 °C
49 dBA

SPECIFICATIONS

7