Steps
6
Remove air duct
Remove 2 connection screws between air
duct and water tray. Lift the air duct up to
remove it.
a. Remove cover plate ( air duct)
Remove 2 connection screws and then
remove the cover plate.
b. Remove flow guide loop
Remove 4 connections screws and then
remove the flow guide loop.
c. Remove centrifugal fan blade
Remove nut fixing centrifugal fan blade.
Then remove the fan blade.(as shown in
fig3).
d. Remove motor
Remove 3 connection screws and then
remove motor (as shown in fig 4).
22
Procedure
flow guide loop
screws
fig.2
fig.4
screws
screws
fig.1
centrifugal
fan blade
nut
fig.3
fan motor
screws
Service Manual
Maintenance