Updating Your Gt (Detailed Steps For Apple/Mac) - Bully Dog 40417 Owner's Manual

1. Return your vehicle to stock. See "Uninstalling - Returning to Stock" section for detailed instructions on this process.
2. Connect your Micro SD card to your computer.
• Connect the Micro SD card using a card reader.
OR
• Connect the GT Platinumwith the Micro SD card installed by using a USB cable. Do not use the HDMI cable to update the GT Platinum.
4. Go to the Bully Dog website and click on the link for Update Agent.
• There are two locations for this link:
• Under Quick Links, on the lower right side of the home page
• Under Download, in the black toolbar on the upper right side of the home page.
5. At the bottom of the page, under the heading for MACINTOSH USERS ONLY, click the link for GT Platinum. This will allow you
to download the zipped file labeled GTUFiles.zip.
6. Find where your computer saved the file (it will most likely be in your Downloads folder).
7. Extract all the files in the GTUFiles.zip file.
8. Copy the contents of the extracted file directly onto your SD card.
9. Install the Micro SD card in your GT Platinum unit.
10. Connect your GT Platinum unit to your vehicle.
11. Choose the Update GT Software option from the Main Menu.
• If the Update GT Software option is not available:
- Choose Update GT Firmware.
OR
- Scroll to the top of the Main Menu and choose Change Vehicle, then choose your vehicle from the list.
12. Confirm that you want the GT Platinum to load the file.
13. Let the GT Platinum finish loading the file and rebooting – be sure not to disconnect it or interrupt power in any other way
during this part of the process.
The GT Platinum has now been updated!
30
UPDATING YOUR GT PLATINUM
(DETAILED STEPS FOR APPLE)