Customer Action
5. Turn Right Turn Signal
Switch ON.
6. Turn Left Turn Signal
Switch ON.
7. Turn Left Turn Signal
Switch OFF. (Turn Signal
Switch Must Be Placed In
Neutral State).
8. Turn Ignition OFF.
9. Turn Hazard Flashers
OFF (Manually).
Customer Will See
Right Turn Light Is ON
SOLID. Left Turn Light
BLINKS.
Left Turn Light Is ON
SOLID. Right Turn Light
Is ON SOLID.
Left Turn light Is OFF.
Right Turn Light is OFF.
System is now reset and
the engine may be
started.
If a reset procedure step is not completed within 60
seconds, then the turn signal lights will blink and the
reset procedure must be performed again in order to be
successful.
REFUELING IN EMERGENCY
The fuel filling procedure in case of emergency is de-
scribed in the "Emergency Refueling Procedure". Refer to
"Adding Fuel" in "Starting And Operating" for further
information.
IF YOUR ENGINE OVERHEATS
In any of the following situations, you can reduce the
potential for overheating your engine by taking the
appropriate action.
• On the highways — slow down.
IN CASE OF EMERGENCY 431
8