Installing The Thermistor Cable - Asus SABERTOOTH Z170 MARK 1 Accessory Installation Manual

Installing the Thermistor cable

The Thermistor cable works together with the Thermal Radar 2 utility to allow you to monitor the
temperature of selected devices or critical components inside your motherboard.
Thermistor
connector
To install the Thermistor cable:
1. Locate the thermal sensor headers labeled
T_SENSOR1, T_SENSOR2, or T_SENSOR3
on your motherboard then connect the
thermistor cable connector to any of these
headers.
2. Put the thermistor sensor in contact with the
surface of the component or part you want to
monitor and secure it with an adhesive tape.
The adhesive tape is purchased separately.
The Thermistor sensor operating
temperature ranges from 0
3. Launch the Thermal Radar 2 utility on your
computer.
o o
C – 80 C.
Thermistor sensor
9