Disassembly Instructions - Nokia 5510 NPM-5 Service Manual

Nokia Mobile Phones Customer Care E&A
Technical Services, Repair Concepts

3. DISASSEMBLY INSTRUCTIONS

Attention: Before starting this procedure you must take care of ESD precautions like being in your
ESD-area and connecting your arm wrist. For more information please look at chapter 6.
Before opening the unit the display should be
protected with a foil. Then open the 2 upper screws
from the B-Cover. Please note, that the unit has 16
screws which aren't equal in length and thread.
Turn around the phone release the other side from
A-Cover. To avoid damages, plastic tweezers should
be preferred. Where the clips are located can be seen
in the right picture.
Unscrew the 8 screws from the Light Guide of UI
module.
Service Manual 5510 Level 2
PAGE 8 (34)
Confidential
The A-Cover can be released from the lower right
side on. Place the plastic tweezers between the
cover clip and the power button. Same has to be
done at the left side just near the Port Cover.
The cover is fixed with 3 plastic clips, which have to
be released carefully. After that the cover can be
removed together with the keymats.
Take away unit of Light Guide, UI module, CMT
module and D-Cover.
Copyright 2001 © Nokia Mobile Phones
Approved 1.0
SQX 00306-en MWy
20.11.2001