Front Panel Displays, Controls, Push-Buttons - McIntosh MP100 Owner's Manual

MM (Moving Magnet) LOAD (PF) Control
with indicators, used to select the capaci-
tive value in picofarads added to the Input
Signal Path for a flat Frequency Response
from the connected MM Phono Cartridge
MONO Push-button with indica-
tor, combines the Left and Right
Channel signals for Monophonic
Sound
12
INPUT Push-button with indicator,
used to select the Turntable Phono
Cartridge type either Moving Magnet
(MM) or Moving Coil (MC)
MM LOAD (PF)
150 200
M P 1 0 0 P H O N O P R E A M P L I F I E R
100 300
MONO
50 400
DIGITAL OUTPUT Push-button with indicators, provides
either a LOw or HIgh Audio Level to the Analog-to-Digital
Converter Circuitry. There is also a "CLIP" indicator show-
ing when to select the LO DIGITAL OUTPUT mode
INPUT DIGITAL OUTPUT
STANDBY / ON
MM MC LO CLIP HI
RESET
Front Panel Displays, Controls and Push-buttons
MC (Moving Coil) LOAD (OHMS) Control
with indicators, used to select the resistive
value in ohms added to the Input Signal
Path for a flat frequency response from the
connected MC Phono Cartridge
MC LOAD (OHMS)
100 200
50 400
25 1K
STANDBY/ON Push-button
with indicator, switches the
MP100 ON or OFF (Standby)
and resets the microprocessors