Rear Panel Connections - McIntosh MP100 Owner's Manual

Rear Panel Connections

PWR CTRL (Power Control) TRIGger IN
receives turn-on signals from a McIntosh
component and TRIGger OUT sends
turn-on signals on to another McIntosh
Component
Connect the MP100 power cord
to a live AC outlet. Refer to
information on the back panel
of your MP100 to determine the
correct voltage for your unit
8
COAXial Digital AUDIO OUTPUT
sends a Digital Audio Signal to a
Preamplifier or an A/V Control
Center with a D/A Converter or a
Decoder
OPTICAL Digital AUDIO OUTPUT
sends a Digital Audio Signal to a
Preamplifier or an A/V Control Center
with a D/A Converter or a Decoder
USB DIGITAL AUDIO OUTPUT
with control signal for connection
to a computer
UNBALanced AUDIO
OUTPUTS supply analog
audio signals to Unbalanced
Inputs of other components
BALANCED AUDIO OUTPUTS
supply analog audio signals to
connect to Balanced Inputs of
other components
Rear Panel Connections
PHONO MM accepts
signals from a Moving
Magnet Phono Cartridge
GND terminals accept
a ground wire from a
turntable
PHONO MC accepts
the low level signals
from a Moving Coil
Phono Cartridge