LG LWS3081ST Installation Manual page 7

Part 2 INSTALLATION REQUIREMENTS
The second step of the installation is to remove any packing material from the oven before installing the oven.
2. Open the oven door and remove packaging materials and oven racks inside the oven.
3. Door removal is not a requirement for installation of the oven, but is an added convenience.
To remove the door, follow the steps below.
Step. 1
Fully open the door.
Step. 2
towards the door's
frame, to the unlocked
position.
is wrapped separately and taped to the top of the unit.
CAUTION
- Discoloration, delamination or melting may occur.
IMPORTANT NOTE
heavy. Firmly grasp the door by the sides before lifting
it off the hinges.
cause dents or scratches.
the cabinet opening. Use caution when lifting the oven
and wear gloves to protect hands from any sharp
edges. Failure to follow these instructions may result in
injury.
Lock
Slot
Unlock
Hinge
lock
Step. 3
Firmly grasp both sides of the door at the top.
Step. 4
Close door to the door removal
position, which is approximately
Step. 5
hinge arm is clear of the slot.
- These spacers center the oven in the space
provided. The oven must be centered to prevent
excess heat buildup that may result in heat damage
or fire.
- 7 -
about 5
CAUTION
Spacer