Using The Sp33 4Kvm; Front Panel Controls; Front Panel Display; Switching On And Off - Primare SP33 User Manual

USinG the SP33 4KVM

front PAnel ControlS

Almost all the functions of the SP33 4KVM Multi-Channel
Processor can be accessed using the two front panel
controls and four push buttons, and information about its
operation is displayed on the front panel display:
Selector
Selects an input, or operates the setup menus
Menu @
Selects the setup menu.
Select R
Selects the current menu option.
Level _
Displays each setting and allows you to change them with
the VOLUME control.
Mute/Standby O
Press briefly to mute the sound.
Hold down to switch the SP33 4KVM to standby.
Volume
Adjusts the volume.


front PAnel diSPlAy

The front panel display shows:
•
The processing mode; eg STEREO, or NO LOCK if there
is no signal on a digital input.
•
The current source; eg Blu-ray
•
The volume; eg 41 or MUTE.
To blank the front panel display
•
Press the DIM button on the remote control.
The normal display will reappear while you adjust any
settings.
Press the DIM button again to restore the display.

SwitChinG on And off

To switch on
•
Use the switch on the back panel.
During normal operation you can leave the SP33 4KVM
switched on and in standby.
To switch to standby
•
Hold down the O button on the front panel or remote
control.
To switch on from standby
•
Press the O button on the front panel or remote
control.
Input Source Audio input
1 Blu-ray HDMI 1
2 Sat HDMI 2
3 Games HDMI 3
4 PC HDMI 4
5 DVB HDMI 5
6 TV HDMI 1 ARC
7 CD Analog 1
8 SACD Ext 7.1
9 Tuner Analog 2

SeleCtinG A SoUrCe

The SP33 4KVM allows you to define up to 15 sources.
Each source can use one of the seven digital and ten
analog inputs, and any source can be combined with one
of the HDMI inputs. Alternatively, a multi-channel source,
called EXT 7.1, can be defined using analog inputs 5 to 8.
When the SP33 4KVM is first supplied the nine standard
sources shown in the table below are already set up for
you.
You can simply disable any of these sources that you do
not need; see Input/Output , page 12. You can also change
any source to use different inputs, or configure your
own sources with any name you choose and using any
particular inputs as appropriate for the source.
To select a source
•
Turn the SELECTOR control on the front panel until
the name of the source is shown on the front panel
display.
•
Alternatively, press the A or V buttons on the remote
control to step between sources.
You can also select an input by pressing the input number
on the remote control.
Video 2CH mode Description
HDMI 1 Stereo Blu-Ray disc player
HDMI 2 Stereo Digital satellite receiver
HDMI 3 Stereo Game console
HDMI 4 Stereo Streaming server
HDMI 5 Stereo Digital television receiver
None Stereo Television
None Bypass CD player
None Bypass SACD player
None Bypass Radio tuner
SP33 4KVM AV Preamplifier User Guide