Technical Specification - Primare SP33 User Manual

teChniCAl SPeCifiCAtion

oUtPUtS
Balanced analog outputs
Front (left and right)
Center, Sub, Surr (left and right)
Surr back (left and right)
Unbalanced analog outputs
Front (left and right)
Center, Sub
Surr (left and right)
Surr back (left and right)
Analog record output
1 RCA (left and right)
Zone2 output
1 RCA (left and right)
Digital outputs
1 RCA, 1 TOS-Link
Video outputs
2 HDMI, with assignable ARC
inPUtS
Analog inputs
2 balanced, 8 RCA, incl. 7.1 inputs
Digital inputs
1 balanced, 3 RCA, 3 TOS-Link.
Video Inputs
6 HDMI
diGitAl
Frequency response
20Hz-20kHz ±0.2dB
THD and noise
0.005% @1kHz (AES17 filter)
SP33 4KVM AV Preamplifier User Guide
AnAloG
THD
<0.005%, 20Hz-20kHz
Signal to noise ratio
-110dB
Frequency response
10Hz-100kHz, 1dB
Input impedance
47kΩ unbalanced
3kΩ balanced
Output impedance
47Ω unbalanced
47Ω balanced
ProCeSSinG
Video
HDMI matrix switching with HDCP 2.2 and OSD
3D and 4K UHD pass-through:
24Hz 4:4:4 4096 x 2160
24/25/30Hz 4:4:4 3840 x 2160
50/60Hz 4:2:0 3840 x 2160
Modes
Stereo, Bypass, Party,
Dolby Prologic IIx Music,
Dolby Prologic IIx Movie,
DTS NEO:6 MUSIC
DTS NEO:6 CINEMA
Decoding formats
Dolby Digital
Dolby Digital EX
Dolby Prologic II
Dolby Prologic IIx
Dolby EX
Dolby Plus
Dolby TrueHD
DTS
Decoding formats (cont.)
DTS ES
DTS Neo:6
DTS 96/24
DTS HDMaster Audio
DTS HD High Res audio
MULTI/2 CH PCM/LPCM
Sampling rates
32KHz,44.1KHz,48KHz,
88.2KHz,96KHz,192KHz
Control
1 IR Input
3 12V outputs (triggers),
1 RS232
RS232
The RS232 connector allows your dealer to upgrade the
firmware on your SP33 4KVM, or control the SP33 4KVM
as part of a multi-room system. Do not connect anything
to this socket unless instructed by your dealer.
GenerAl
Power consumption
Operating: <60W.
Fully stabilized SMPS
Size
430 x 385 x 180mm (WxDxH)
Weight
12kg
17