Speaker Settings; Speaker Setup; Level Adjust - Primare SP33 User Manual

SPeAKer SettinGS

SPeAKer SetUP

The SPEAKER SETUP menu allows you to set up the
speakers:
Option Description
MODE See below.
FRONT L+R Select SMALL or LARGE to specify
whether the front speakers can handle
bass.
CENTER Select NONE, SMALL, or LARGE to
specify whether there is a center
speaker in the system, and whether it
is small or large.
Select NONE, SMALL, or LARGE to
SURROUND
specify information about the surround
speakers.
SURR BACK Select NONE, 1/SMALL, 1/LARGE,
2/SMALL, or 2/LARGE to specify the
number and size of the surround back
speakers.
Select OFF or ON to specify whether
SUBWOOFER
the layout should include a subwoofer.
LR+LFE XOVER Allows you to define the crossover
CENTER XOVER frequency (40Hz to 200Hz or DEFAULT)
SURR XOVER used for the LFE, CENTER, and SURR
speakers.
•
Set MODE to GENERAL, and then set the other
parameters as appropriate for the speakers in your
system.
SP33 4KVM AV Preamplifier User Guide
Additional modes DOLBY D, DTS, and OTHER are
available in order to alter the GENERAL settings of
SPEAKER SETUP, LEVEL ADJUST, and SPEAKER
DIST for Dolby Digital, DTS, and 2-channel sources
respectively.
SMALL is the factory default setting for CENTER,
SURROUND, and SURR BACK speakers as a precaution
for systems using bass limited speakers at those
positions. In most systems, using relatively full range
speakers, the LARGE setting will result in superior
performance.
For more detailed information, consult your authorized
Primare dealer.

leVel AdjUSt

The LEVEL ADJUST menu allows you to adjust the levels
so that the sound from each speaker is equally loud at the
listening position.
•
Highlight each of the speakers in turn; a white noise
signal will be played through the speaker.
•
Use the A and V buttons on the remote control to
adjust the level.
For best results measure the level at the listening
position using a Sound Pressure Level meter.
13