Transportation And Changing Of Installation Position - Zanussi ZRT44200XA User Manual

PART- 5.

Transportation and changing of installation position

• Original package and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick package, bands or strong cords and follow
the instructions for transportation on the package for re-transportation.
• Remove
accessories, vegetable bins etc.) or fix
them into the fridge against shocks using
bands during
transportation.
Carry your fridge in the upright position.
Repositioning the door
• It is not possible to change the opening direction of your fridge door, if the door
handles on your fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any
handles.
• If the door opening direction of your fridge may be changed, you should contact the
nearest Authorised Service to have the opening direction changed.
BEFORE CALLING YOUR AFTER SALES SERVICE
PART- 6.
What to do if your refrigerator does not operate;
Check that;
• There is no power ,
• The general switch in your home is disconnected ,
• The thermostat setting is on «•» position ,
• The socket is not sufficient. To check this, plug in another appliance that you know
which is working into the same socket.
What to do if your refrigerator performs poorly;
Check that;
• You have not overloaded the appliance ,
• The doors are closed perfectly ,
• There is no dust on the condenser ,
• There is enough place at the rear and side walls.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
movable parts
re-positioning
(shelves,
and
EN - 13 -