Hitachi DV-PF73U Service Manual page 13

28. CLEAR/C.RESET Button
●
DVD mode
Press to reset the setting.
●
VCR mode
Press to reset the counter. Press to exit from the MENU
screen.
29. ANGLE Button
Press to change the camera angle to see the sequence being
played back from a different angle.
30. SUBTITLE Button
Press to select the desired subtitle language.
TIMER Button
35.
Press to put the VCR into standby mode for a timer record-
ing.
31. MENU Button
●
DVD mode
Press to display the menu of the Disc.
●
VCR mode
Press to access the VCR menu.
32. Arrow Buttons
●
DVD mode
44.p/o B s Buttons
Move the cursor and determines its position.
●
VCR mode
44.p/o Buttons
Press to enter digits when setting program (For example:
setting clock or timer program). Press to select the setting
modes from the on screen menu.
B Button
When setting program (For example: setting clock or timer
program), press to determine your selection and proceed to
the next step you want to input. Press to determine the set-
ting modes from the on screen menu. Press to add or delete
channel numbers during channel preset.
s Button
Press to cancel a setting of timer program. Press to correct
digits when setting program (For example: setting clock or
timer program). Press to add or delete channel numbers
during channel preset.
33. ENTER Button
Press to accept a setting.
34. RETURN Button
Returns to the previous operation.
35. VCR/TV Button
Use to select VCR or TV position.
This DVD/VCR does not have VCR/TV light. If noise
appears on your TV when you turn on DVD/VCR(VCR
mode), press this button.
●VCR Position
To view playback, to monitor video recordings or to
watch TV using the VCR tuner.
●
TV Position
To watch TV or to view one program while recording
another.
DISC NAVIGATION Button
Use to DISC NAVIGATION function.
36.DVD Button
Press to select DVD mode for the remote control.
●
You can switch the OUTPUT mode either by pressing
OUTPUT on the front panel, or by pressing DVD or VCR
on the remote control. However, if you press OUTPUT on
the front panel first, you need to re-select the corre-
sponding mode by pressing DVD or VCR on the remote
control.
37. SLOW Button
During tape playback, press to view the video tape in slow
motion. Press again to resume normal playback. This but-
ton does not affect DVD playback.
38. SKIP Buttons
●
DVD mode
Press to skip Chapters or Tracks.
39. STOP Button
●
DVD mode
Press to stop the disc motion.
●
VCR mode
Press to stop the tape motion.
40. h Button
●
DVD mode
Press to view the DVD picture in fast reverse motion or
to reverse playback of an Audio CD.
●
VCR mode
Press to rewind the tape, or to view the picture rapidly in
reverse during the playback mode (Rewind Search).
41. TV POWER Button
To exclusively turn ON/OFF the TV.
42. VIDEO/TV Button
Press to select the external input mode or TV mode of the TV.
43. VOL p/o Buttons
Press to exclusively control the TV volume.
44. TV CH p/o Buttons
Press to exclusively control the TV channels.
45. PAUSE/STEP Button
●
DVD mode
Press to pause Disc playback. Press repeatedly to
advance the DVD picture step by step (or one frame at a
time).
●
VCR mode
While recording, press to temporarily stop the recording
(pause). Press a second time to resume normal recording.
You can not pause a Instant Recording Timer. Or, press
during tape playback to freeze the picture. Press to
advance the picture one frame at a time during still mode.
46. D Button
●
DVD mode
Press to fast forward the Disc. Press PAUSE/STEP, then
press this button to begin slow motion playback. Press
this button repeatedly to change the forward speed of
slow motion.
●
VCR mode
Press to rapidly advance the tape, or view the picture
rapidly in forward during playback (Forward Search).
47. PLAY Button
●
DVD mode
Press to begin playback.
●
VCR mode
Press to begin playback.
48. CH Button
Press to change TV channels on the DVD/VCR.
49. REC Button
Press once to start a recording.
50. SPEED Button
Press to select the VCR's recording speed (SP or SLP)
51. VCR Button
Press to select VCR mode for the remote control.
●
You can switch the OUTPUT mode either by pressing
OUTPUT on the front panel, or by pressing DVD or VCR
on the remote control. However, if you press OUTPUT on
the front panel first, you need to re-select the corre-
sponding mode by pressing DVD or VCR on the remote
control.
52. SETUP Button
Press to enter the setup mode.
53. DISC NAVIGATION Button
Press to display the first scenes of each chapter of the title
being played.
54. TOP MENU Button
Press to call up the title menu.
55. DISPLAY Button
●
DVD mode
Press to access or remove the display screen during
DVD or Audio CD playback.
●
VCR mode
Press to access or remove the VCR's on-screen status
display.
56. AUDIO Button
Press to select a desired audio language or sound mode.
2-5