Operating Controls And Functions - Hitachi DV-PF73U Service Manual

2-3 OPERATING CONTROLS AND FUNCTIONS

[ DV-PF73U/PF73U(C) ]
FRONT PANEL
REMOTE CONTROL
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
1. Disc loading tray
2. OPEN/CLOSE Button
Press to insert discs into or remove them from the tray.
3. CASSETTE COMPARTMENT
4. POWER Light
Lights up when the power is on.
5. POWER/STANDBY Button
Press to turn the power on and off.
6. CHANNEL Buttons
In VCR mode, press to change TV channels on the VCR;
press to adjust the tracking during normal or slow motion
playback; press to remove vertical jitter in a Still picture.
7. PLAY Button(VCR)
Press to begin playback.
8. STOP/EJECT Button (VCR)
EJECT Button
Press to remove the tape from the VCR.
STOP Button
Press to stop the tape motion.
9. AUDIO In Jacks
Connect audio cables coming from the audio out jacks of a
camcorder, another VCR, or an audio source here.
10. VIDEO In Jack
Connect a video cable coming from the video out jack of a
camcorder, another VCR, or a video source (laser disc
player, camcorder, etc.) here.
11. F.FWD Button (VCR)
Press to rapidly advance the tape, or view the picture rapid-
ly in forward during playback. (Forward Search).
2-4
1
STOP
21
59
SEARCH OPEN/CLOSE
SURROUND MODE EJECT
58
A-B REPEAT
57
1 2 3
REPEAT
4 5 6
MODE
7 8 9
56
ZOOM
CLEAR/C. RESET
0
+10
ANGLE SUBTITLE/TIMER AUDIO DISPLAY
55
MENU TOP MENU
54
ENTER
53
RETURN
SETUP
DISC 52
NAVIGATION
DVD VCR/TV VCR 51
50
SLOW SPEED REC
49
SKIP CH
48
47
STOP PLAY
46
PAUSE/STEP
45
VOL CH
TV POWER
44
VIDEO/TV
43
TV
2
OPEN/CLOSE
PLAY
19
20 18 16
12. REW Button (VCR)
Press to rewind the tape, or to view the picture rapidly in
reverse during the playback mode (Rewind Search).
13. REC/IRT Button
Press once to start a recording. Press repeatedly to start a
Instant Recording Timer.
14. REC Light
Lights up during recording.
15. TIMER Light
This light glows when the DVD/VCR is in standby mode
or off for a timer recording or during a Instant Recording
Timer. It flashes if TIMER is pressed for a timer recording,
but there is no tape in the DVD/VCR. It flashes when all
timer recordings or Instant Recording Timer, are finished.
16 VCR OUTPUT Light (Green)
This light appears when the VCR output mode is selected.
You can only watch tapes when the green VCR OUTPUT
light is on. To make the green VCR OUTPUT light come
on, VCR on the remote control or OUTPUT on the front
panel.
17. OUTPUT Button
Press to select DVD mode or VCR mode.
●
You can switch the output mode either by pressing
OUTPUT on the front panel, or by pressing DVD or
VCR on the remote control. However, if you press
OUTPUT on the front panel first, you need to re-
select the corresponding mode by pressing DVD or
VCR on the remote control.
18. DVD OUTPUT Light (Green)
This light appears when the DVD output mode is selected.
You can only watch DVDs when the green DVD OUTPUT
Light is on. To make the green DVD OUTPUT light come
on, press DVD on the remote control or OUTPUT on the
front panel.
19. Display, Remote Sensor Window
20. PLAY Button (DVD)
Press to begin playback.
21. STOP Button (DVD)
Stops operation of the disc.
22. SURROUND Button
Press to activate the 3D sound.
23. y y /I(POWER/STANDBY) Button
Press to turn the power on and off.
(As to the indication of the Operate switch,
y y /I
and " " shows electrical power stand-by.
24. A-B REPEAT Button
Repeats playback of a selected section.
25. REPEAT Button
Repeats playback of the current disc, title, chapter or track.
26. MODE Button
Activates program playback or random playback mode
when playing CDs or MP3. Sets Black level and virtual
surround.
27. ZOOM Button
Enlarges part of a DVD-reproduced image.
3
LINE 2
DVD OUTPUT VCR TIMER REC REC/IRT REW F.FWD
VIDEO IN L (mono) AUDIO IN R
17 15 13 11 9
14 12 10
)
4 5
POWER/STANDBY
CHANNEL
STOP/EJECT PLAY
7
8 6
"I" shows ON