Bolt tightening torque:
42 Nm (4.28 kgf-m, 31 ft-lb)
EMU26341
Tilt support lever for power trim and
tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
1
1. Tilt support lever
A
B
ZMU01863
ZMU07206
ECM00660
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position.
EMU40760
Cowling lock lever
The cowling lock levers are used to secure
the top cowling.
1
1. Cowling lock lever
1
1. Cowling lock lever(s)
EMU40802
Flushing device
The flushing device is used to clean the cool-
ing water passages of the outboard motor
Components
ZMU06909
ZMU06910
34