Avoiding An Area - Volvo V70 Operating Manual

03 Planning your trip

Avoiding an area

Selecting an area
Enter an area to be a avoided
Settings Route options
specified areas
03
This function is designed to help you avoid
being guided to areas, cities or sections of cit-
ies that you prefer not to drive through. The
system always excludes these areas when cal-
culating a route.
NOTE
Highways that are part of a calculated route
that pass through an avoided area are an
exception.
1. Press
and choose
2. Press
again to enter the area.
None
•
Press ENTER to deactivate previously
selected areas.
Selected
1. Press
to enter new areas.
2. Press ENTER to activate previously stored
areas, which are marked with an X.
See also the following step pertaining to the
"Avoid specified areas" sub-menu.
44
Sub-menu – avoiding specified areas
Settings
specified areas
Avoid
Select alternatives in the sub-menu and press
ENTER.
Map
Use the navigation control to enter the area to
be avoided directly on the map.
See also the next step, "Entering areas on the
map."
Address
Enter the address of an area to be avoided. The
address will comprise the center of the area.
Entering areas on the map
Selected .
Settings
specified areas
Use the navigation control to move the mid-
point of the cross hairs to the center of the area
to be avoided.
The name of the place at which the mid-point
of the cross hairs is pointing will be displayed
at the bottom of the map. The rectangle shows
the size of the area.
1. Press ENTER to access the sub-menu.
2. Select alternatives and press ENTER.
Route options Avoid
Selected
Route options Avoid
Selected Map
Scale
Enter the size of the map to be displayed of the
area to be avoided.
Set area to avoid
Save the specified area.
Adjust size
•
Change the size of the area using the
navigation control.
•
Press BACK to undo a change.
Adjust area
•
Move to a new area using the navigation
control.
•
Press BACK to undo a move.
Saved areas to be avoided
Settings Route options Avoid
specified areas Selected
Select which of the previously saved areas are
to be avoided when a route is calculated.
These are marked with an X.
1. Select an area with
or
2. Mark or unmark an area using
OK
Activate areas marked with an X. The activated
areas will be shown on the map.
Map
.
or .