Selecting an area
Enter an area to be a avoided
Settings
Route options
Avoid
specified areas
This function is designed to help you avoid
being guided to areas, cities or sections of cit-
ies that you prefer not to drive through. The
system always excludes these areas when cal-
culating a route.
NOTE
Highways that are part of a calculated route
that pass through an avoided area are an
exception.
1. Press
Selected
and choose
2. Press
again to enter the area.
None
•
Press ENTER to deactivate previously
selected areas.
Selected
1. Press
to enter new areas.
2. Press ENTER to activate previously stored
areas, which are marked with an X.
See also the following step pertaining to the
"Avoid specified areas" sub-menu.
03 Planning your trip
Sub-menu – avoiding specified areas
.
Settings
Route options
specified areas
Select alternatives in the sub-menu and press
ENTER.
Map
Use the navigation control to enter the area to
be avoided directly on the map.
See also the next step, "Entering areas on the
map."
Address
Enter the address of an area to be avoided. The
address will comprise the center of the area.
Avoiding an area
03
Avoid
Selected
``
53