Related Manuals for Minuteman Lumina 28 M28036TDQP
Summary of Contents for Minuteman Lumina 28 M28036TDQP
- Page 1 Lumina 28 Traction Drive Model: Battery Burnisher M28036TDQP ￭ ￭ ￭ OPERATION SERVICE PARTS CARE...
-
Page 2: Table Of Contents
BASE ASSEMBLY ..........................5 BASE ASSEMBLY BOM ........................6 MAINFRAME ASSEMBLY.........................7 MAINFRAME ASSEMBLY BOM .......................8 PAD DRIVER ASSEMBLY ........................9 ELECTRICAL ASSEMBLY ......................10 ELECTRICAL ASSEMBLY BOM.....................11 CONSOLE ASSEMBLY........................12 CONSOLE ASSEMBLY BOM ......................13 DASHBOARD ASSEMBLY AND BOM....................14 SCHEMATICS..........................17 Minuteman International Made Simple Commercial Limited Warranty..........22... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS CAUTION: Operators must read and understand this manual before operating or maintaining this machine. Keep hands and feet clear of moving parts while machine is in operation. Disconnect the power to the machine by pressing the Red Emergency Disconnect Button when charging batteries or during installation or removal of pads. -
Page 4: Operating Instructions
We do not recommend mixing AMP hour capacities. Any alternate battery sets can be used if they equal physical size and capacity. On board battery charger must be recalibrated if alternate batteries are used. Contact Minuteman Engineering for procedure. See next page for service and installation. OPERATION Before starting, familiarize yourself with the machine and its controls (see “Machine Overview”... -
Page 5: Battery Service And Installation
BATTERY SERVICE AND INSTALLATION WARNING: Battery acid can cause burns. When working on or around batteries, wear protective clothing, safety glasses and remove metal jewelry. Do not lay tools or metal objects on top of batteries. CHARGING OF BATTERIES Charging batteries generates explosive gasses. -
Page 6: Pad Installation
PAD INSTALLATION The red emergency disconnect button and the key switch must be in the OFF position before installation and the pad driver assembly in the RAISED position. Remove center cup locking device by gripping on outer edges and turning clockwise. NOTE: Center cup cannot be pulled out; it must be unscrewed. -
Page 7: Exploded Views
EXPLODED VIEWS BASE ASSEMBLY... -
Page 8: Base Assembly Bom
BASE ASSEMBLY BOM... -
Page 9: Mainframe Assembly
MAINFRAME ASSEMBLY... -
Page 10: Mainframe Assembly Bom
MAINFRAME ASSEMBLY BOM... -
Page 11: Pad Driver Assembly
PAD DRIVER ASSEMBLY... -
Page 12: Electrical Assembly
ELECTRICAL ASSEMBLY... -
Page 13: Electrical Assembly Bom
ELECTRICAL ASSEMBLY BOM... -
Page 14: Console Assembly
CONSOLE ASSEMBLY... -
Page 15: Console Assembly Bom
CONSOLE ASSEMBLY BOM... -
Page 16: Dashboard Assembly And Bom
DASHBOARD ASSEMBLY... -
Page 19: Schematics
SCHEMATICS... -
Page 24: Minuteman International Made Simple Commercial Limited Warranty
Minuteman International, Inc. warrants to the original purchaser/user that the product is free from defects in workmanship and materials under normal use. Minuteman will, at its option, repair or replace without charge, parts that fail under normal use and service when operated and maintained in accordance with the applicable operation and instruction manuals.