Dell Studio XPS 435 MT Service Manual page 29

10. Replace the eight screws that secure the system board to the chassis.
11. Connect the cables that you removed from the system board.
12. Replace the memory modules (see
13. Replace the processor (see
CAUTION: Ensure that the heat sink assembly is correctly seated and secure.
14. Replace any expansion cards on the system board (see
15. Replace the computer cover (see
16. Connect your computer and devices to electrical outlets, and turn them on.
17. Flash the system BIOS, as needed.
NOTE: For information on flashing the system BIOS, see
Back to Contents Page
Replacing Memory Module(s)).
Replacing the Processor).
Installing a PCI Express
Replacing the Computer Cover).
Card).
Flashing the BIOS.