Back to Contents Page
Replacing the Badge Back Light
Dell Studio XPS™ 435T/9000 Service Manual
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
1. Follow the procedures in
Before You
2. Remove the computer cover (see
3. Remove the front panel (see
4. Press the tabs away from the badge back light and lift the badge back light away from the front panel.
1
badge back light
3
tabs (3)
5. To replace the badge back light, align the holes in the badge back light to the projections on the front panel.
6. Press the badge back light down until it clicks in place.
7. Reconnect the badge back light cable.
8. Replace the front panel (see
9. Replace the computer cover (see
Back to Contents Page
Begin.
Replacing the Computer
Cover).
Replacing the Front
Panel).
2
badge back light cable
Replacing the Front
Panel).
Replacing the Computer
Cover).