Download Print this page

Key To Symbols; Symbols - Husqvarna 323P4 Operator's Manual

Hide thumbs

Advertisement

Symbols

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or fatal
injury to the operator or others. It is
extremely important that you read and
understand the contents of the operator's
manual.
Please read the operator's manual carefully
and make sure you understand the
instructions before using the machine.
Always wear:
A protective helmet where there is a risk
of falling objects
Approved hearing protection
Protective goggles or a visor
This product is in accordance with
applicable EC directives.
This machine is not electrically insulated.
If the machine touches or comes close to
high-voltage power lines it could lead to
death or serious bodily injury. Electricity
can jump from one point to another by
arcing. The higher the voltage, the
greater the distance electricity can jump.
Electricity can also travel through
branches and other objects, especially if
they are wet. Always keep a distance of
at least 10 m between the machine and high-voltage power
lines and/or any objects that are touching them. If have to
work within this safe distance you should always contact the
relevant power company to make sure the power is switched
off before you start work.
This machine has a long reach. Make sure that no people or
animals come closer than 15 m when the machine is running.
Always wear approved protective gloves.
Wear sturdy, non-slip boots.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
2 –
English

KEY TO SYMBOLS

The engine is switched off by moving the
stop switch to the stop position. CAUTION!
The stop switch automatically returns to the
start position. In order to prevent
unintentional starting, the spark plug cap
must be removed from the spark plug when assembling,
checking and/or performing maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.
Filling with chain oil and adjusting oil flow

Advertisement

loading

  Related Manuals for Husqvarna 323P4

This manual is also suitable for:

325p5x series