Fuelling - Husqvarna 323P4 Operator's Manual

Hide thumbs Also See for 323P4:
Table of Contents


Always mix the petrol and oil in a clean container intended
for fuel.
Always start by filling half the amount of the petrol to be
used. Then add the entire amount of oil. Mix (shake) the
fuel mixture. Add the remaining amount of petrol.
Mix (shake) the fuel mixture thoroughly before filling the
machine's fuel tank.
Do not mix more than one month's supply of fuel at a time.
If the machine is not used for some time the fuel tank
should be emptied and cleaned.
WARNING! The catalytic converter muffler
gets very hot during and after use. This also
applies during idling. Be aware of the fire
hazard, especially when working near
flammable substances and/or vapours.


Always use a fuel container with an anti-spill valve.
Clean the area around the fuel cap. Contamination in the
tank can cause operating problems.
Ensure that the fuel is well mixed by shaking the container
before filling the tank.
WARNING! Taking the following precautions,
will lessen the risk of fire:
Do not smoke or place hot objects near fuel.
Always shut off the engine before refuelling.
Always stop the engine and let it cool for a
few minutes before refuelling.
When refuelling, open the fuel cap slowly so
that any excess pressure is released gently.
Tighten the fuel cap carefully after refuelling.
Always move the machine away from the
refuelling area before starting.
– 17


Table of Contents

This manual is also suitable for:

325p5x series

Table of Contents