Introduction; Operating Instructions - Omnitronic TM-2000 User Manual

For your own safety, please read this user manual carefully
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

1. INTRODUCTION

Thank you for having chosen an OMNITRONIC TM-2000. If you follow the instructions given in this manual,
we can assure you that you will enjoy this device for many years.
Unpack your OMNITRONIC TM-2000.
Please make sure that there are no obvious transport damages. Should you notice any damage, do not take
the device into operation and immediately consult your local dealer.
1.1 Features
Universal pocket transmitter
• For transmitting the microphone signals to the receiver
• Operation in the low-interference UHF-band (792.500-814.000 MHz)
• Up to 50 pocket transmitters with 50 receivers can be operated simultaneously
• Frequency and sensitivity switchable via mini-switches
• 837 carrier frequencies switchable in 50 kHz steps
• LCD-display with battery capacity and frequency
• Battery capacity transmission to receiver
• For 2 x 1.5 V Mignon batteries (type AA)
• Operation range 200 meters
• License-free and approved in Germany
• The lavalier microphone or headset-microphone has to be ordered separately
• Connection via Mini-XLR-socket

OPERATING INSTRUCTIONS

TM-2000
Pocket transmitter
CAUTION!
Keep this device away from rain and moisture!
Only use batteries recommended by the manufacturer!
before you initial start-up.
8/23 00024304.DOC, Version 1.2