Control Reference Guide; Using The Remote Control - Panasonic SC-HC39 Owner's Manual

Control reference guide

Top view

∫ Using the remote control

Insert the battery so the terminals (i and j) match
those in the remote control.
Point it at the remote control signal sensor on this
unit.
≥ To avoid interference, please do not put any objects in
front of signal sensor.
1
Standby/on switch [Í/I] (Í)
Press to switch the unit from on to standby mode or
vice versa.
In standby mode, the unit is still consuming a small
amount of power.
2
Select the audio source
On this unit:
"CD" -. "BLUETOOTH" -. "FM" -. "AUX"
^------------------------------------------------------------n
On the remote control
[ ]: "BLUETOOTH"
[CD]: "CD"
[RADIO/AUX]: "FM" ,. "AUX"
3
Basic playback control buttons
4
Adjust the volume (0 (min) to 50 (max))
5
Open or close the sliding door
6
Bluetooth ® -pairing button
≥ Press to select "BLUETOOTH" as the audio source.
≥ Press and hold to enter pairing mode (l p. 8) or
disconnect a Bluetooth
7
NFC touch area (l p. 8)
8
DC OUT terminal (l p. 7)
9
AUX IN jack (l p. 6)
10
Remote control signal sensor
Distance: Within approx. 7 m (23 ft) directly in front
Angle: Approx. 30o left and right
11
Display
12
Sliding door
13
Enter setup menu
14
Change the displayed information
15
Enter sound menu
16
Dim the display panel
Press again to cancel.
17
Mute the sound
Press again to cancel. "MUTE" is also canceled when
the volume is adjusted or the unit is turned off.
18
Enter playback menu
19
Selection/OK
® device (l p. 9).
(Alkaline or
manganese battery)
5
RQT9882