Maintenance; Maintenance Schedule - Husqvarna Rider ProFlex 21 Operator's Manual

Maintenance

Maintenance schedule

The following is a list of maintenance procedures that
must be performed on the Rider. For points marked with
footnote number 4, turn to an authorised service
representative.
G = Described in this manual.
❍ = Not described in this manual.
Maintenance
Check for fuel and oil leaks
Check the parking brake
Check the engine's oil level
(every refuelling)
Check the fuel pump's air filter
Check the safety switch, seat
Check the safety switch, lifting lever
Check the safety switch, pedal system
Check/clean the engine's cooling
air intake
Check the cutting unit:
• securing of the blades
• condition of the blades
(sharpness, shape, etc.)
Check the steering cables
(any play, etc.)
Check fastenings (screws, nuts, etc.)
Start the engine and blades, listen
for unusual sounds
Clean under the cutting unit
Clean the transmission's cooling air
intake
Check the battery's acid level
Check the transmission oil level
Check the condition of belts, belt
pulleys, etc.
Check for damage
Check the air pressure in the tyres
(60 kPa)
MAINTENANCE
Page Daily main-
tenance
before after
❍
-
G
37
G
64
G
41
G
44
G
44
G
44
G
33
G
49
G
51
G
51
G
34
❍
-
G
22
G
50
G
33
42
69
-
-
42
Weekly At Maintenance interval
3 least in hours
main-
once
tenance
25
a year
G
G
G
G
G
❍
❍
G
50 100 300
29
English-