System Chart - Radionics D2112 Installation Manual

NFPA Standard
Minimum Hours
of Standby
Battery
D2103 Enclosure
D8103 Enclosure
D8108A Enclosure
skirt) and D1625 transformer.
Order D101 lock for D8103.
D8109 Enclosure
Opt.
D126 Battery
D127 Reversing
Opt.
Relay
D164 Telephone
Cord
D202 Command
Center
D262 Smoke
Detector Head
D261A Base
D431, D435, D438,
D440, D442, D448,
Indicating Device
D1240 Battery
D1625 Transformer
D8004 Transformer
Opt.
Enclosure
D8122 Derived
Channel S.T.U.
D8130 Release
Module
The D2112 and D2112E control panels are suitable
for Grade A Local Mercantile Premises Alarm
systems and Grade A Mercantile Safe and Vault
Alarm systems. For all local applications and
Grades, the model D8108A Attack Resistant
Enclosure and a UL listed sounding device are
required.
The D2112 and D2112E control panels are suitable
for Grade B when used with a UL listed local
sounding device. Suitable for Grade AA Central
Station Mercantile when used with model D8122
derived channel subscriber terminal unit.
74-07111-000-D 1/96

System Chart

72 74 74 72
24 + 24 +
4 4 mins 4 mins
4
alarm alarm
Included with panel.
Optional, order D2112M
(panel on D2102 mounting
1
1
Opt.
No Opt. Opt.
Required to connect panel to
RJ31X TelCo Block.
1+ 1+ 1+ 1+
1•
1•
Opt.
1+ 1+ 1+
No No 1
1
Required for all applications.
Opt. Opt.
Opt.
Optional, contact TelCo for availability of
derived channel service.
Optional
D2112/D2112E Installation Manual
D2112 and D2112E not listed for these applications
72
4
4 4
No =
No No No
No No No
Req. =
Req. Req. Req.
Opt. =
No No No
1+ =
Opt. Opt.
Opt.
Opt. Opt. Opt.
2+ =
1+ 1+ 1+
1• =
1 1
1
Opt.
Opt.
The D2112 and D2112E control panels are suitable
for Grade A Mercantile Premises and Mercantile
Safe and Vault alarm systems. Suitable for Grade
AA Police Station Mercantile Premises and
Mercantile Safe and Vault systems when model
D8122 derived channel subscriber terminal unit is
used. For all Police Station Connect applications the
model D8108A Attack Resistant Enclosure and a UL
listed sounding device are required.
The D2112 and D2112E control panels are suitable
for Grade B Proprietary Burglary applications when
used with a UL listed local sounding device and
Grade BB proprietary Burglar applications when
installed with a model D8122 derived channel
subscriber terminal unit.
Page 19
72 71, 72 71, 72 71
Key
Not acceptable for this application
Required for this application
Optional for this application
One or more required for this
application. Consult the appropriate
standard.
Two or more required for this
application. Consult the appropriate
standard.
D2112 Only: At least one detector
required. You can substitute other
2-wire detectors listed for use with
the D2112. You could use the
D262 with the D270 four-wire base
or other manufacturers' four wire
detectors. You must use a listed
power supervision relay with four
wire detectors.
= Listed bell (siren) housing required
for burglary alarm bell or siren.
= (Empty Box) Not used for this
application.
© 1995 Radionics
71
71