Brother DCP-8070D Quick Setup Manual page 12

USB
For USB Interface Users
(Mac OS X 10.3.9 or greater)
10
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
IMPORTANT
Make sure a USB Flash memory drive is not
inserted into the machine.
11
Connect the USB cable
IMPORTANT
• DO NOT connect the machine to a USB port
on a keyboard or a non-powered USB hub.
• Connect the machine directly to your
Macintosh.
a
Remove the label covering the USB interface
connector.
12
b
Connect the USB cable to the USB connector
on the machine marked with the
Then connect the cable to your computer.
12
Install MFL-Pro Suite
a
Put the supplied CD-ROM into your CD-ROM
drive.
b
Double-click Start Here OSX to install.
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
Note
Please see the Software User's Guide on the
CD-ROM if you want to install the PS driver.
(Brother's BR-Script Driver)
Macintosh
symbol.