2. Functions of the Folding
Basic Operation of the Folding Finisher
This section explains Basic Operation of the Folding Finisher.
A
Confirm that the Folding Finisher is in offline mode.
B
Select the paper size using the {Paper size} key, and then select the paper
orientation using the {Length/Width} key.
C
Configure settings for the fold type as required.
D
Place the paper on the Paper Feed Table with the rear side facing up.
E
If the Folding Finisher does not start folding automatically, press the
{Start} key.
Note
❒ You can set the Folding Finisher to start folding paper placed on the Paper
Feed Table automatically or after pressing the {Start} key. For details, see
"Changing the Folding Finisher Settings".
Reference
p.9 "Offline Mode"
p.14 "Placing Paper on the Paper Feed Table"
p.37 "Changing the Folding Finisher Settings"
ATS 003S
ATS 004S
Finisher
15