Starting The "Water Filter"Or "Frost Protection" Programme - Siemens TI 903 Series User Manual

Demo mode
Beverage settings
Espresso / Cof-
feetemperature
Hot water temper-
ature
Order coffee/milk
--------
Starting the "Water filter"or
"frost protection" programme
Briefly press the $/±button.
1.
The rotary selector can be used to
2.
select the "Water filter" or "frost
protection" programme. The current
setting is marked on the display.
The rotary selector can also be
Note:
used to select a service programme.
~ "Service programmes" on page 55
Water filter
A water filter lessens limescale
deposits, reduces impurities in water
and improves the taste of the coffee.
Water filters are available from retailers
or from customer service.
~ "Accessories" on page 40
Inserting or replacing a water filter
A new water filter must be rinsed before
it can be used.
Select "Water filter" in the menu
1.
settings.
Use the navigation button to select
2.
"insert" or "replace".
on
■
off
■
normal
■
high
■
max.
■
> 70 °C
■
> 80 °C
■
> 85 °C
■
> 90 °C
■
> 97 °C
■
first milk
■
first coffee
■
For presentation purposes only. The setting "off"
must be activated for normal operation. The set-
ting is only possible in the first 3 minutes after
switching on the appliance.
Setting the temperature for coffee drinks.
The setting is effective for all preparation types.
Setting the temperature for hot water.
The setting is effective for all preparation types.
Setting that governs whether milk or coffee
should be brewed and dispensed first. (Cappuc-
cino)
Use the measuring spoon to press
3.
the water filter firmly into the empty
water tank.
Fill the water tank with water up to
4.
the "max" marking.
Place a container with a capacity of
5.
at least 1.0 l under the outlet and
confirm.
Water will now flow through the filter.
The filter is rinsed.
Subsequently empty the container.
6.
The appliance is ready for use again.
Menu settings en
51